[FS] Jamma Adapters on pcb + miscellaneous items

Vente de jeux et matériels pour bornes d'arcade.
Achetez et vendez tout ce qui se branche dans une borne.
Sale of games and equipment for arcade cabinets.
Buy and sell everything that can be connected to an arcade cabinet.
Message
Auteur
kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters pcb

#76 Message par kold666 »

-k- a écrit : 11 juin 2020, 14:16 I have also tested SunA Brick Zone, it works with the Taito jumper set on Taito, but direction is inverted, do you know if there is any easy fix on the adapter ?
Or maybe a dip switch setting on the board but I never found the manual, I see you have one on your Blog, how did you set it up ?
yes Brickzone has directions inverted in comparison to all other games. I made a separate female-female connector for this ( inverting only the directions wires) which plug into adapter.
https://arcadepcbfever.blogspot.com/

Avatar de l’utilisateur
-k-
stick de plomb
Messages : 96
Inscription : 15 oct. 2015, 13:57
A remercié : 0
A été remercié : 0

Re: [FS] Jamma Adapters pcb

#77 Message par -k- »

Ok thanks,

I was thinking to make a special jumper for your adapter, if I take the signal from the upper Taito connector and then send it to the lowest row (crossing input with outputs) it should invert the directions....I'll try that this weekend.

I don't know why but I like BrickZone a lot, maybe that's the effect of the Lambada soundtrack :P

kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters pcb

#78 Message par kold666 »

:lol:
https://arcadepcbfever.blogspot.com/

kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters pcb

#79 Message par kold666 »

Added Atari Xevious adapter ( different from Namco version) and Williams classic games adapter
https://arcadepcbfever.blogspot.com/

kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters pcb

#80 Message par kold666 »

updated with Cloak and Dagger jamma adapter and a new section for PCB reproductions / daugherboards
https://arcadepcbfever.blogspot.com/

Avatar de l’utilisateur
Averell
stick d'or
Messages : 1404
Inscription : 05 juin 2018, 13:44
A remercié : 34 fois
A été remercié : 49 fois

Re: [FS] Jamma Adapters pcb

#81 Message par Averell »

With such a large offer, why don'y you have Mah Jong to Jamma adapters ? I will be interested in :wink:

kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters pcb

#82 Message par kold666 »

Hi
I didn t get this request yet
I have actually only poker ladies which has mahjong
Pinout.
I Will look into it soon
https://arcadepcbfever.blogspot.com/

Avatar de l’utilisateur
Averell
stick d'or
Messages : 1404
Inscription : 05 juin 2018, 13:44
A remercié : 34 fois
A été remercié : 49 fois

Re: [FS] Jamma Adapters pcb

#83 Message par Averell »

If you need infos, dont hesitate, even if I am pretty sure you can handle it :)
Just be aware of the «speaker - » issue.

Avatar de l’utilisateur
Bun
stick d'argent
Messages : 561
Inscription : 16 janv. 2007, 15:54
Localisation : Haute-Savoie 74 FRANCE et Genève Suisse
A remercié : 17 fois
A été remercié : 9 fois

Re: [FS] Jamma Adapters pcb

#84 Message par Bun »

Pm for a Sync Stabilizer / cleaner Jamma passthrough

Avatar de l’utilisateur
Bun
stick d'argent
Messages : 561
Inscription : 16 janv. 2007, 15:54
Localisation : Haute-Savoie 74 FRANCE et Genève Suisse
A remercié : 17 fois
A été remercié : 9 fois

Re: [FS] Jamma Adapters pcb

#85 Message par Bun »

Bun a écrit : 31 oct. 2020, 10:28 Pm for a Sync Stabilizer / cleaner Jamma passthrough
Thank you for the adaptor helps some issues vsync with some games on the pvm 2730qm :-D
Great seller

kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters pcb

#86 Message par kold666 »

Thx!
https://arcadepcbfever.blogspot.com/

Avatar de l’utilisateur
Royaltea
stick d'argent
Messages : 577
Inscription : 08 sept. 2020, 10:28
A remercié : 28 fois
A été remercié : 14 fois

Re: [FS] Jamma Adapters pcb

#87 Message par Royaltea »

Hello
I just bought an Atari 82 dig dug board hack galaga with no jamma adapters...
Did you think it s the same than Namco same period ?
Need one, thanks.

kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters pcb

#88 Message par kold666 »

Royaltea a écrit : 03 déc. 2020, 08:09 Hello
I just bought an Atari 82 dig dug board hack galaga with no jamma adapters...
Did you think it s the same than Namco same period ?
Need one, thanks.
I sent a PM to have a picture of the board
thx
https://arcadepcbfever.blogspot.com/

Avatar de l’utilisateur
Royaltea
stick d'argent
Messages : 577
Inscription : 08 sept. 2020, 10:28
A remercié : 28 fois
A été remercié : 14 fois

Re: [FS] Jamma Adapters pcb

#89 Message par Royaltea »


kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters on pcb

#90 Message par kold666 »

update with 5114 to FRAM daughterboard for Williams games / Berzerk
https://arcadepcbfever.blogspot.com/

kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters on pcb

#91 Message par kold666 »

added Atari Dig Dug jamma adapter
https://arcadepcbfever.blogspot.com/

kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters on pcb + miscellaneous items

#92 Message par kold666 »

updates and addition of Fantasy Zone 2 ram expansion daughterboard
https://arcadepcbfever.blogspot.com/

kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters on pcb + miscellaneous items

#93 Message par kold666 »

Added Orca games jamma adapter
https://arcadepcbfever.blogspot.com/

kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters on pcb + miscellaneous items

#94 Message par kold666 »

Added Punchout Jamma adapter
https://arcadepcbfever.blogspot.com/

kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters on pcb + miscellaneous items

#95 Message par kold666 »

Added Jaleco Argus Jamma adapter
https://arcadepcbfever.blogspot.com/

kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters on pcb + miscellaneous items

#96 Message par kold666 »

updated with Naughty Boy / Pop Flamer and Atari Millipede Jamma adapters
https://arcadepcbfever.blogspot.com/

Aurelien.d
stick de zinc
Messages : 437
Inscription : 22 oct. 2018, 10:09
Localisation : 77
A remercié : 7 fois
A été remercié : 4 fois

Re: [FS] Jamma Adapters on pcb + miscellaneous items

#97 Message par Aurelien.d »

kold666 a écrit : 30 juin 2018, 09:21 For sale

JAMMA ADAPTERS to use classic games on Jamma harness

Be aware that they are tested on original pcbs. If you have a bootleg pcb please ask first!

Capcom Jamma Adapter (for Ghosts and Goblins ,Commando, Gunsmoke,Section Z, Legendary Wings, Avengers, Trojan, Exed Exes ) :

Image

Price 20€
Availability: 3 pieces on stock

IREM Jamma Adapter with possibility to swap push buttons ( Moon Patrol, Kung Fu Master / Spartan X, Spelunker 1 and , Lode Runner, 10 Yard Fight, Kid Niki Radical Ninja, Traverse USA,Tropical Angel, Wily Tower / Atomic Boy)

Image

Price 20€
Availability: 4 pieces on stock

Namco Jamma Adapter (Xevious,Mappy,Bosconian,Super Pacman,Phozon,Motos,Galaga,Gaplus
Pacland,Dig Dug 1 e 2,Sky Kid,Metro Cross,Toypop,Baraduke,Dragon Buster)

With Alternative pacland controls (buttons for directions) and Libble Rabble controls ( double way joystick)

Including one set of video harness for either Namco or Sidam boards.

Image
Image

Price 30€
Additional video harness is 10€

Availability: 2 pieces on stock

Sega System 1 Jamma Adapter with possibility to swap push buttons.

List of games:
http://www.system16.com/hardware.php?id=693


Image

Price 20€
Availability: 6 pieces on stock

Sega System 16/24 Jamma Adapter with configurable push buttons.
List of games:

http://www.system16.com/hardware.php?id=695

Image

Basic Price 25€
Availability: 11 pieces on stock

10€ overprice to solder connector and wiring for Passing Shot 1P controls which are on a separate board on the game board
It supports both single joystick play and the original control panel controls with double joysticks
Will send also the wiring schematic where to connect the cables on the original pcb

Image

Sega System 16/24 Jamma Adapter DELUXE edition, with configurable push buttons via switches.
List of games:

http://www.system16.com/hardware.php?id=695

Image

Basic Price 35€
Availability: 2 pieces on stock

10€ overprice to solder connector and wiring for Passing Shot 1P controls which are on a separate board on the game board
It supports both single joystick play and the original control panel controls with double joysticks
Will send also the wiring schematic where to connect the cables on the original pcb

Tehkan Jamma Adapter
for Bombjack ,Senyjo,Guzzler,Rygar,Star Force,Tank Busters,Mega Force, Pinball Action


Image

Price 30€
Availability: 10 pieces on stock

1942 / Vulgus Jamma Adapter

Image

Price: 20€
Availability: 2 pieces on stock

Exerion Jamma Adapter
compatible also with Formation Z / Aerobot and City Connection


Image

Price: 20€
Availability: 4 pieces on stock

Falcon Type A Jamma Adapter
compatible with:
Falcon Crazy Kong ( it has two connectors , type A is for the side one)
Phoenix
Eyes from Rockola/Zaccaria
Some Sigma games such as Battle Cruiser M-12

IMPORTANT: It is not compatible with Crazy Kong by ORCA.


Image

Price 20€
Availability: 9 pieces on stock

Falcon Type B Jamma Adapter
compatible with:

Crush Roller
Van Van Car
Kyugo/Crux games such as:
Gyrodine/Buzzard
Sky Lancer
Flashgal
99 Last War / Repulse
Legend

Image

Price: 20€
Availability: 8 Items on stock

Higemaru Jamma Adapter

Image

Price 20€
Availability: 1 pieces on stock

Son Son Jamma Adapter

Image

Price: 20€
Availability: 2 pieces on stock

Konami Jamma Adapter
compatible with all pre jamma Konami games with support up to 3 buttons (Iron Horse).
Example of games compatible: Scramble, Time Pilot, Time Pilot 84, Pooyan, Tutankham, Megazone, Green Beret, Jail Break, Gyruss...

Possibility to swap 1st/2nd button and to choose alternate button controls for Hyper Olympic/Hyper Sports as found in the original cabinet.

Supports additional right speaker for Gyruss pcb stereo music

Image

Price: 25€
Availability: 6 pieces on stock

Konami Jamma Adapter GYRUSS edition
Same features and compatibility as the standard Konami adapter but additionally with:
RCA stereo speakers for Gyruss
Silkscreened Gyruss logo on the back

Image
Image

Price: 30€
Availability: 5 pieces on stock

Nichibutsu Jamma Adapter
compatible with Mag Max,Terra Cresta, Dangar Ufo Robot, Cosmo Police Galivan, Mighy Guy


Image

Price: 20€
Availability: 3 pieces on stock

SNK Jamma Adapter
Compatible with SNK classic games such as:

Ikari Warriors
Alpha Mission/Arian Mission
TNK3/TANK

Image

Price: 20€
Availability: 11 pieces on stock

TECFRI Jamma Adapter
compatible with TECFRI spanish games such as:
Hole Land
Crazy Rally
Sauro
Tricky Doc


Image

Price: 20€
Availability: 4 Items on stock

Toaplan Jamma Adapter
compatible with Slap Fight,Tiger Heli, Get Star / Guardian and Performan


Image

Price: 20€
Availability: 4 pieces on stock

Zaxxon Jamma Adapter

compatible with Zaxxon ,Super Zaxxon, Future Spy and Congo Bongo


Image

Price 20€
Note: 3 stack shorter boards japanese Zaxxon needs an extra cable for Sound. Please consider extra 5€ if you need this cable.

Availability: 4 pieces on stock

Universal Mr.Do! Jamma Adapter with built in amplifier

Compatible with Lady Bug, Mr.Do,Mr.Do Castle, Mr.Do Vs Unicorns, Do Run Run, Mr.Do Wild Ride, Cosmic Avenger


May work with other games or bootlegs but haven't tested.

The adapter comes with amplifier with adjustable Volume / Gain / Bass trimmers for games which don't have a sound amp on board

For Lady Bug which comes already with an amplifier on the pcb, you can switch off the adapter one.

It has also a footprint to solder an external connector in case you want to use an external amplfier of your choice.

Image

Price 35€
Availability: 3 pieces on stock

DATA EAST Jamma Adapter with possibility to play Karate Champ and Karate Champ Vs
Compatible with:
Karate Champ and Karate Champ VS ( the jumpers selects Jamma 2P player joystick for attacks. Only 1 player is supported)
Battle Wings
Big Pro Wrestling!
B-Wings
Competition Golf
Ring King
Shootout
Battle Lane Vol. 5
Express Raider


Image

Price 25€
Availability: 6 piece on stock

Escape From The Planets of The Robots Monster Jamma Adapter with circuit to use digital joysticks instead of the original rare and expensive HALL Effect ones

Image

Price 40€
Availability: 5 pieces on stock

TAITO classics Jamma Adapter
Compatible with:
Bubble Bobble, Tokio / Scramble Formation, Arkanoid,Elevator Action, Jungle King,Pit Run,Alpine Ski,Front Line,Tin Star,Wild Western,Kick Start
With a set of jumpers you can select single joystick games or double joystick games such as Tin Star, Front Line and Wild Western

Image

Basic price is 35€ and you will get male connector soldered for Arkanoid spinner and the 12 pins Power H harness needed for all the games ( see picture)

Availability: 7 pieces on stock

Optional Power Harness for Legend of Kage 10€ extra

Optional Harness and male connectors for Halley Comet / Ben Bero Beh pcb for 15€ extra

Image

Optional Harness and male connectors for Operation Wolf 15€ extra
Note: the 4 wires for the gun will be left unconnected because they need to be adapted to the pinout of the optical gun in use.

Image

SNK classics early 80s adapter
Compatible with:
Fantasy,Satan Of Saturn,Sasuke vs. Commander, Nibbler, Vanguard, Pioneer Baloon
With set of Jumpers you can select alternate controls for Vanguard with second joystick to shoot in the 4 directions.

Image

Price 25€
Availability: 2 pieces on stock

Taito Samurai / The Alpha Z / Mission 660 / Lady Master of Kung Fu

Image

Price 20€
Availability: 1 pieces on stock

Technos Jamma Adapter
Compatible with early Technos games such as Eggs, Scramble Eggs, Mysterious Stones, Acrobatic DogFight
Exciting Hour,Mat Mania , probably others

Image

Price 20€
Availability: 3 pieces on stock

Frisky Tom / Seicross / Radical Radial Jamma Adapter

Image

Price 30€
Availability: 5 pieces on stock

Spinner Jamma interface multipurpose
Compatible with Taito F3 spinner games ( Puchi Carat, Arkanoid Returns), Suna games ( Goindol, Brick Zone), Sega Nihon games ( Free kick)
Caliber 50 ( using Loop24 joystick), Badlands ( you can play it with a spinner yes!)
Spinner inputs are going to either pin 25/26 or 20/21 so many other games could work using the combination of pulldown resistors ( 2.2K or 10k)
It is tested with a TAITO spinner which doesn't have any pulldown resistors but it can work with any other spinners providing you disable
the pulldown resistors using the jumpers

It supports also Combat School joystick version ( directions are on a separate connector) and Cabal third button ( on the original board
is is wired on the test button)

Image

Basic Price 35€
Combat school joystick harness and male connectors price: 10€

Availability: 5 pieces on stock

Nintendo Jamma adapter
Compatible with Donkey Kong ( 2 board ), Donkey Kong Jr. , Mario Bros, Popeye and Donkey Kong 3

The adapter comes with quality colour inversion circuit which is a reproduction of the Hantarex one found on Nintendo cabinets imported in Europe.

The adapter has also an amplifier with adjustable volume, gain and bass.

Both the inversion circuit and the amplifier can be disabled via jumpers for later nintendo boards which have aldready the circuits installed on the boards.

Image

Price 45€

Availability: 5 pieces on stock

Taito Gladiator: Compatible with Gladiator and Ping Pong King

Image

Price 20€
Availability: 2 pieces on stock

DECO Games Jamma adapter: compatible with the following pcbs: Burnin Rubber / Bump and Jump / Burger Time / Disco No.1 / Zoar / Liberation and maybe others

Image

Price all assembled including 10 pins edge connector for bottom board: 30€

Availability: 2 pieces on stock

Alpha Denshi Classics: compatible with Equites, Splendor Blast, High Voltage, Kyros, Super Stingray, Bull Fighter

Image

Price all assembled including additional 6 pins edge connector for sound: 30€

Availability: 3 pieces on stock

Kangaroo jamma adapter for rev.B PCB ( the one more common with the edge connectors)

Image

Price all assembled including 10 pins edge connector for bottom board: 30€
Availability: 2 pieces on stock

Qbert bootleg jamma adapter with circuit to use a normal 8 way joystick ( originally you have to rotate a 4 way joystick by 45°, not very confortable on a jamma cabinet ;-)

Image

Price 25€
Availability: 1 pieces on stock

Sega System E jamma adapter with support also for Riddle of Pythagoras spinner. The adapter is inserted durectly on the two AMP connectors of the System E

Image
Image

Price 25€
Availability: 1 pieces on stock

Additional harness between adapter and Riddle OF Pythagoras daughterboard: 10€

Taito Great Swordsman Jamma adapter

Image

Price 25€
Availability: 2 pieces on stock

Namco Pacman / Galaxian / Sega Mooncresta / Tank Battalion Jamma adapter

It could work also with bootlegs but no guarantee is given

Image

Price 25€
Availability: 1 pieces stock

Atari Centipede Jamma Adapter

including sound amplifier on board with adjustable Volume / Gain / bass trimmers.
Supports both Trackball and Joystick gameplay

Image

Price 35€
Availability: 8 pieces on stock

Atari Crystal Castles Jamma Adapter

including sound amplifier on board with adjustable Volume / Gain / bass trimmers.

Image

Price 35€
Availability: 3 pieces on stock

Playchoice 10 Double monitor Jamma adapter

comes with quality colour inversion circuit, sound amplifier with adjustable Volume / Gain / Bass trimmers and with the possibility to switch the 2 screens on the fly with button 3 ( instruction / credit screen and game screen )
Separate gun connector with clear pinout.

Image
Image
Image
Image

Price 50€
Availability: 0 pieces on stock

Nintendo VS Jamma adapter

comes with quality colour inversion circuit, sound amplifier with adjustable Volume / Gain / Bass trimmers.
Possibility to switch switch between Main side and Slave side of the pcb providing you populate the board with two games.

Image

Price 55€
Availability: 2 pieces on stock

Bank Panic Jamma adapter

compatible with Bank Panic and Super Cross II

Image

Price 20€
Availability: 1 pieces on stock

Le Bagnard / Bagman Jamma adapter

compatible both with the original Le Bagnard by Valadon Automation and Bagman licensed to Stern

Image

for Le Bagnard ( Valadon pcb) you have to modify the pcb as in the picture below to bypass AC diodes bridges.
Bagman by Stern doesn't need any modification.

Image

Price 20€
Availability: 4 pieces on stock

Jamma interface to play some selected MVS games / Jamma games which use normally a joystick, with a spinner
Games tested to play great with a spinner are:
MVS Puzzle Bubble series, Trash Rally, Puzzle De Pon series
Jamma: Thunder and Lighting , Pop'n'Pop, Gunbarich

Additionally you can play Ultimate Ecology and Guardian Force with Forgotten World Spinner or compatible one

Image

Price 45€
Availability: 2 pieces on stock

Taito Space Invaders Jamma adapter ( colour and B/W )
compatible also with Space Invaders Part 2 , Lunar Rescue , Ozma Wars and some other 3 board stack 8080 based hardware Taito games
Complete with harness for bottom board

Image
Image

Price 45€
Availability: 2 pieces on Stock

Crazy Climber Jamma Adapter
1P joystick control left arm, 2P Joystick control right arm

Image

Price 30€
Availability: 4 pieces on stock

UPL Nova 2001 Jamma adapter

Image

Price 20€
Availability: 1 pieces on stock

UPL Ninja-kun Ma-jo no Boken Jamma adapter

Image

Price 20€
Availability: 3 pieces on stock

Kaneko Roller Aces Jamma adapter
PCB is only amplified stereo, sound outputs only from RCA connectors

Image

Price 25€
Availability: 3 pieces on stock

Zaccaria Money Money Jamma adapter
compatible also with Jack Rabbit

Image

Price 20€
Availability: 2 pieces on stock

Sega Tapper Jamma adapter
Compatible only with the Sega version

Image

Price 20€
Availability: 3 pieces on stock

Pengo Jamma adapter

Image

Price 20€
Availability: 4 pieces on stock

Nichibutsu Moon Shuttle Jamma Adapter

Image

Price 30€
Availability: 4 pieces on stock

Pinbo Jamma Adapter

Compatible also with Chameleon

Image

Price 20€
Availability: 3 pieces on stock

Chinese Heroe Jamma Adapter

Image

Price 20€
Availability: 4 pieces on stock

Sync Stabilizer / cleaner Jamma passthrough with voltmeter

Useful to correct sync issues on older pre jamma boards on certain monitors and also with some Jamma boards on BVM / PVM monitors
Possibility to adjust color intensity with RGB trimmers

Image

Prices
40€ with Voltemeter
35€ without Voltmeter

Availability: 4 pieces on stock

GIGAS Jamma adapter
including harness for daughterboard

Image
Image

Price 30€
Availability: 5 pieces on stock

Konami Ping Pong Jamma Adapter

Image

Price 20€
Availability: 5 pieces on stock

Gaelco / Ervisa Modular system Jamma adapter

for the spanish Modular System rack.
It supports inversion of attack and jumping buttons

Image
Image

Price 20€
Availability: 4 pieces on stock

Atari Missile Command Jamma Adapter

including sound amplifier on board with adjustable Volume / Gain / bass trimmers.

Image
Image

Price 35€
Availability: 2 pieces on stock

Atari Xevious Jamma Adapter

including sound amplifier on board with adjustable Volume / Gain / bass trimmers and additional harness

Image

Image

Price 40€
Availability: 1 pieces om stock

Williams Jamma Adapter

compatible with Defender , Stargate, Joust, Robotron, Bubbles and Sinistar
Sinistar will need an external dedicated control panel.

On the adapter there are switches and buttons to simulate the coin doors needed to enter test mode and change settings.
There is also a Sync combiner for Defender early version in order to output Csync instead of Hsync and Vsync which is not compatible with Jamma setup.

Stargate has an option to use button 6 ( inviso ) on pin 27 Jamma or on the start button

The adapter PCB has 4 holes in order to screw it on a wood panel togheter with the other boards and have a "tidy" setup to bring around :-D

Image

Image

Image

Prices:
65€ for the Jamma adapter assembled, without Harness.
145€ for the adapter including the harness 50cm lenght, including the wiring between Sound board and Romboard and one game input wiring of your choice.
15€ extra for additional game input wiring

Availability: 1 pieces on stock.
Harness will require 2 weeks from order.

Cloak And Dagger Jamma Adapter

with built in sound amplifier and harness. Second "firing" Joystick is wired to second player joystick

Image

Image

Price 40€
Availability: 4 pieces on stock

Atari Dig Dug Jamma Adapter

with built in sound amplifier

Image

Price 35€
Availability: 0 pieces on stock


Orca Type A Jamma adapter

compatible with Orca's Crazy Kong, Springer, Hopper Robo, Changes, Marine Boy, maybe some additional bootlegs


Image

Price 20€

Availability: 4 pieces on stock

Nintendo Punchout Jamma adapter

Compatible with Super Punchout and Arm Wrestling.

The adapter comes with quality colour inversion circuit which is a reproduction of the Hantarex one found on Nintendo cabinets imported in Europe.

The adapter has also an amplifier with adjustable volume, gain and bass.

The upper screen can be switched by pressing briefly 1P Start button.

Optionally you can wire a second monitor permanently via a 6 pins connector on the adapter but you will need an external colour inversion circuit


Image

Price 50€

Availability: 3 pieces on stock


Jaleco Argus Jamma adapter


Image

Price 20€

Availability: 4 pieces on stock


Jaleco Naughty Boy / Pop Flamer Jamma adapter


Image

Price 20€

Availability 4 pieces on stock


Atari Millipede Jamma Adapter

including sound amplifier on board with adjustable Volume / Gain / bass trimmers.
Supports both Trackball and Joystick gameplay.
Supports high score saving

Image

Price 55€
Availability: 10 pieces on stock


MISCELLANEOUS PCB / DAUGHERBOARDS / REPRODUCTIONS


Atari Interconnect Board A039431

Used on: Pole Position, Atari Xevious, Cloak and Dagger ( maybe others )

Image

Image

Price 25€
Availability: 2 pieces on stock

Atari NVRAM X2212 to FRAM daugherboard

used to replace the unreliable X2212 NVRAMs found on Crystal Castle, Food Fight, Star Wars, Return of the Jedi, I-Robot with an FRAM

It features 2 "slots" to have different settings and hiscore tables

Image

Price: 25€
Availability: 4 pieces on stock

Taito America 5114 NVRAM to FRAM daughterboard

used to get rid of the nasty NiCd battery which can leak acid

Compatible with QIX, Zookeeper, Electric YoYo, Space Dungeon, Kram.
It features 2 "slots" to have different settings and hiscore tables

Image

Price 25€
Availability: 2 pieces on stock

Counter Run / Freekick CPU daugherboard module

used to desuicide both games. Same form factor as the suicide module.
Support hi-score saving as the original module, using external lithium battery present on the pcb.

Image

price 55€ including Freekick and Counter run program rom.
Availability: 1 piece on stock

5114 NVRAM to FRAM daughterboard

used to get rid of the nasty NiCd batteries which can leak acid

Compatible with Williams boards ( Joust, Robotron, Stargate, Bubbles, Sinistar) and Berzerk ( close W11 jumper to use it)
Can be used with other games and Pinball boards( not tested )

It features 2 "slots" to have different settings and hiscore tables

Image

Price 25€
Availability: 5 pieces on stock

System16 RAM Expansion for Fantasy Zone 2 conversion by M2

used to expand the ram of a system16 motherboard up to 512k.
To make a Fantasy Zone 2 conversion you need to install two sockets in place of the System16 original rams and connect 4 wires
from ram daughterboard to motherboard.
Instructions are provided.

Image

Price 40€
Availability: 6 pieces on stock

If something is unclear, please drop me a message!

Shipping rate up to three adapters is 13 euros with registered letter for all Europe.
Exceptions are the Nintendo VS, Williams or adapters which require extended harness: these can cost something more, please ask.

I accept Paypal gift or goods but in the latter case please add 5% on top.
Hello
I would need a jamma snk adapter for Ikari
what is the price shipped to France?

kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters on pcb + miscellaneous items

#98 Message par kold666 »

Added Atari Tempest Jamma Adapter
https://arcadepcbfever.blogspot.com/

kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters on pcb + miscellaneous items

#99 Message par kold666 »

Added Atari I-Robot Jamma adapter
https://arcadepcbfever.blogspot.com/

kold666
stick de bronze
Messages : 236
Inscription : 02 août 2016, 14:22
A remercié : 4 fois
A été remercié : 2 fois

Re: [FS] Jamma Adapters on pcb + miscellaneous items

#100 Message par kold666 »

Added Double Stick Jamma games adapter
https://arcadepcbfever.blogspot.com/

Répondre