[Vds] Taito Type X3/X4 Sega ALLS + Multi SSD Nesica / Panels Lindbergh - Noir cab / Sega I/O board JVS

Vente de jeux et matériels pour bornes d'arcade.
Achetez et vendez tout ce qui se branche dans une borne.
Sale of games and equipment for arcade cabinets.
Buy and sell everything that can be connected to an arcade cabinet.
Répondre
Message
Auteur
Avatar de l’utilisateur
xela974
stick de bronze
Messages : 186
Inscription : 24 janv. 2018, 23:42
Localisation : Chatou
A remercié : 23 fois
A été remercié : 7 fois

[Vds] Taito Type X3/X4 Sega ALLS + Multi SSD Nesica / Panels Lindbergh - Noir cab / Sega I/O board JVS

#1 Message par xela974 »

Hello,

Ci-dessous le matériel dispo à la vente:

- Taito Type X3 : 350 € 330 €/ fdp out (Core i5/ 8 Go ram DDR3 / GTX660) / HD 320 Go
Nettoyé, pate thermique changée

Image
- Taito Type X4 : 400 € b]380 € 340 €/ fdp out (Core i5/ 8 Go ram DDR3 / GTX960 2GB) / HD 320 Go
Nettoyé, pate thermique changée


Image

- Taito Type X4 :420 € fdp out (Core i5/ 8 Go ram DDR3 / GTX10600 6GB) / HD 320 Go Street Fighter V
Nettoyé, pate thermique changée

Image

- Sega ALLS: 420 € fdp out (Core i5 8500/ 16 Go ram DDR3 / GTX1060 6 Go de ram), débloqué, possibilité d'ajout Multi
Nettoyé, pate thermique changée

Image

SSD multi 1 To dispo en option pour TTX3/TTX4/Sega ALLS
:6: Ci-dessous les systèmes présents sur le SSD:
APM3/Atomiswave / Cave / Neogeo / Sega Naomi - Lindbergh - Ringedge I&II / CPSI / CPS II / CPS III / Taito F3 - TTX - TTX2 - TTX3/Steam...
Image

Exemples des systèmes & jeux présents sur le SSD:
Image
Image
Image
Image
Image
Image
Image
Image
Etc.......

2 Sega I/O board JVS Type 3 (Naomi, Lindbergh, Ringedge...) ref.: 837-14572
60€/pièce, frais de port in pour la France

Image

Fast I/O Taito K91X1243A
70€, Colissimo in (reservé)

Nesica reader bleu + loom : 35€ vendu
Image
Image
Image
Control panel 2 players pour G-Balance, TBE 60€ fdp in Vendu
Image
Control panel original 1P AIME pour Sega Lindbergh / Namco Noir Cab / 70 € frais de port in pour la France
stick et boutons Sanwa inclus TBE général
Image

Control panel original 1P pour Sega Lindbergh / Namco Noir Cab / 50 € frais de port in pour la France / 2 de dispo
stick et boutons Sanwa inclus
Image

Control panel original Taito Nesica 1P pour Sega Lindbergh / Namco Noir Cab / 60 € frais de port in pour la France
Loom 1P fourni, stick et boutons Sanwa + lecteur Nesica présent, quelques marques d'usures mais bon état general
Vendu
Image
Plusieurs marquee, très bon état général

Taito : Left 4 Dead 30 € Vendu
Image
Tekken 7 (77 x 30 cm) :45 € Vendu
Image
2 marquee Namco (41 x 11 cm) 1997 : 20€/pièce (Vendu)
Image

Control panel Taito Vewlix diamond 1P original/ très bon état / Complet, joy + boutons full Sanwa + loom...: 120 € :6: vendu
Image
Image
2 control panel originaux (pas des repro) 1P pour Astro, Blast, Naomi, NNC....:
Image
le 1er (en haut) est en tres bon état sur le dessus (traces d'oxidation en dessous du panel mais non visible une fois installé, full sanwa (joy et boutons) et lecteur Aime présent + câblage complet 1P6B : 100 € (vendu à Wildpumpk1n!)

le 2nd (en bas) est dans un état moins bon, 6 boutons Seimitsu,lecteur Banapassport absent: 50 € :6: vendu

Paiement par Paypal Gift ou espèces

Ce qui a été vendu:

Taito type X3 (i3,4 Go et GT640) + multi 500 Go :6: Vendu
Entièrement nettoyé, pâte thermique changée...

Systèmes présents:
Atomiswave / Cave / Neogeo / Sega Naomi - Lindbergh - Ringedge I&II / CPSI / CPS II / CPS III / Taito F3 / TTX / TTX2...

Plug and play jvs, on branche le cable usb de sa carte i/o sur le port JVS, le vga ( ou hdmi/dvi) et le jack
Alim 100 et 220V, pas besoin de convertisseur !
Sega Ringedge + SSD Multi 190€, fdp in ! :6: Vendu
Image

Image

Prête à jouer !
15 jeux inclus:

Image

les meilleurs étant pour moi Caladrius, GG Xrd Revelator et Virtua tennis 4

Image

Système nettoyé, pâte thermique et pile changée + upgrade mémoire à 2Go

Rappel, pour ceux qui ont une borne Lindbergh, le Ringedge fera aussi office d'alim (pour l'i/o, néon....) via le connecteur DC OUT
Sega Lindbergh Control Panel 1L7B d'origine (pas une repro) : 60€ (Vendu PenPen) fdp out
+ boutons et stick Sanwa + harness (non présent sur la photo)
Bon état general, traces d'oxydation sur le dessous
Image
Je vend quelques jeux MVS en loose + 2 joypad SNK , 100 % fonctionnel et en bon état général

-Lot de 2 joypad SNK: 90 € / Vendu
Image
-Super Sidekicks 3: 20€ Vendu
-Puzzle de Pon: 20€ Vendu
-Pop N Bounce: 20€ Vendu
Image
lot Naomi2 + netdimm : 450 € 430€ frais de port in :6: Vendu grosgodzi

Naomi2 + dernier bios jap
-Netdimm 512 Mo (+Zero key)
-écran tactile 3"5 couleur
-RPI+ case + micro sd 64Go + roms Naomi 1/2 et Atomiswave ==> version Pidimboot d'Ezechiel, boot rapide sans memory check !
-câble croisé
Non présent sur la foto mais également fourni:
alim séparée ATX + adaptateur ATX vers Naomi

Bref, plug’n’play !
Image
Harness Jamma to JVS (pour borne NNC principalement) River Service: 80 € fdp in :6: Vendu
de ce type: https://www.rs2006.co.jp/e/jamma_harness/index.html

2 hackpad XBOX360 pour borne Naomi, Newnetcity... plug and play, 50 €fdp in(vendu Seb82) MR
2 ports usb à relier sur l'xbox360, les 3 connecteurs males AMP de votre control panel Naomi, Newnetcity sur les 3 connecteurs femelles du hackpad
Image
Dernière modification par xela974 le 16 mars 2024, 10:11, modifié 104 fois.

Avatar de l’utilisateur
neo vy
stick de bronze
Messages : 138
Inscription : 24 nov. 2018, 14:59
A remercié : 0
A été remercié : 0

Re: NeoGeo - Joypad (x2) + MVS en loose

#2 Message par neo vy »

Salut,
Je suis intéressé par le Puzzle de Pon !
Je te MP

Edit : intéressé par le super sidekicks 3 aussi.

Avatar de l’utilisateur
neo vy
stick de bronze
Messages : 138
Inscription : 24 nov. 2018, 14:59
A remercié : 0
A été remercié : 0

Re: NeoGeo - Joypad (x2) + MVS en loose

#3 Message par neo vy »

Merci pour la remise en mains propres ! :)

Avatar de l’utilisateur
nikolash
stick d'or
Messages : 1375
Inscription : 06 août 2013, 20:15
A remercié : 5 fois
A été remercié : 30 fois

Re: NeoGeo - Joypad (x2) + MVS en loose

#4 Message par nikolash »

Salut, je te prends pop'n bounce si c'est un original.
"Capkit" le gros condensateurs n'est pas changé, la marque des condensateurs sont des jackson ça veut dire que ça à été fait par nikolash, aucune soudure refaite". Winterflame

Avatar de l’utilisateur
xela974
stick de bronze
Messages : 186
Inscription : 24 janv. 2018, 23:42
Localisation : Chatou
A remercié : 23 fois
A été remercié : 7 fois

Re: NeoGeo - Joypad (x2) + MVS en loose

#5 Message par xela974 »

hello Nikolash
Je pense que c'est un convert ? à confirmer !
ci-joint les photos

Image
Image

Aurelien.d
stick de zinc
Messages : 437
Inscription : 22 oct. 2018, 10:09
Localisation : 77
A remercié : 7 fois
A été remercié : 4 fois

Re: NeoGeo - Joypad (x2) + MVS en loose

#6 Message par Aurelien.d »

xela974 a écrit : 21 mai 2020, 01:22 hello Nikolash
Je pense que c'est un convert ? à confirmer !
ci-joint les photos

Image
Image
Je confirme...

Avatar de l’utilisateur
galford999
stick de zinc
Messages : 280
Inscription : 20 févr. 2019, 20:53
Localisation : Ile de France
A remercié : 2 fois
A été remercié : 4 fois

Re: NeoGeo - Joypad (x2) + MVS en loose

#7 Message par galford999 »

Hello.
Mp pour les manettes

++

Avatar de l’utilisateur
xela974
stick de bronze
Messages : 186
Inscription : 24 janv. 2018, 23:42
Localisation : Chatou
A remercié : 23 fois
A été remercié : 7 fois

Re: [Vds] Sega I/O board JVS Type 3

#8 Message par xela974 »

up !
ajout de 2 i/o board Sega type 3, 100% fonctionnelles

Avatar de l’utilisateur
Averell
stick d'or
Messages : 1404
Inscription : 05 juin 2018, 13:44
A remercié : 34 fois
A été remercié : 49 fois

Re: [Vds] Sega I/O board JVS Type 3

#9 Message par Averell »

MP

Avatar de l’utilisateur
gibou
stick de zinc
Messages : 384
Inscription : 02 août 2015, 11:21
A remercié : 18 fois
A été remercié : 4 fois

Re: [Vds] Sega I/O board JVS Type 3

#10 Message par gibou »

Mp info I/O

Avatar de l’utilisateur
gibou
stick de zinc
Messages : 384
Inscription : 02 août 2015, 11:21
A remercié : 18 fois
A été remercié : 4 fois

Re: [Vds] Sega I/O board JVS Type 3

#11 Message par gibou »

I/O payé :)

Avatar de l’utilisateur
xela974
stick de bronze
Messages : 186
Inscription : 24 janv. 2018, 23:42
Localisation : Chatou
A remercié : 23 fois
A été remercié : 7 fois

Re: [Vds] Sega I/O board JVS Type 3, Fast I/O Taito K91X1243A

#12 Message par xela974 »

Up, ajout fast I/O Taito K91X1243A

Avatar de l’utilisateur
Averell
stick d'or
Messages : 1404
Inscription : 05 juin 2018, 13:44
A remercié : 34 fois
A été remercié : 49 fois

Re: [Vds] Sega I/O board JVS Type 3

#13 Message par Averell »

Averell a écrit : 18 nov. 2020, 15:39MP
Carte I/O bien reçue, colis nickel :)

Avatar de l’utilisateur
Royaltea
stick d'argent
Messages : 577
Inscription : 08 sept. 2020, 10:28
A remercié : 28 fois
A été remercié : 14 fois

Re: [Vds] Sega I/O board JVS Type 3, Fast I/O Taito K91X1243A

#14 Message par Royaltea »

Bonjour
Les types 3 sont les seules acceptées par les ringedge, n est ce pas ?

Avatar de l’utilisateur
gibou
stick de zinc
Messages : 384
Inscription : 02 août 2015, 11:21
A remercié : 18 fois
A été remercié : 4 fois

Re: [Vds] Sega I/O board JVS Type 3, Fast I/O Taito K91X1243A

#15 Message par gibou »

colis reçu et super bien emballé.

Merci :)

Avatar de l’utilisateur
xela974
stick de bronze
Messages : 186
Inscription : 24 janv. 2018, 23:42
Localisation : Chatou
A remercié : 23 fois
A été remercié : 7 fois

Re: [Vds] Sega I/O board JVS Type 3, Fast I/O Taito K91X1243A

#16 Message par xela974 »

Up et baisse des prix

Avatar de l’utilisateur
xela974
stick de bronze
Messages : 186
Inscription : 24 janv. 2018, 23:42
Localisation : Chatou
A remercié : 23 fois
A été remercié : 7 fois

Re: [Vds] Sega Naomi2 + netdimm + I/O board JVS Type 3, Fast I/O Taito K91X1243A

#17 Message par xela974 »

Up, ajout Naomi2 + netdimm

kysermens
stick de bronze
Messages : 109
Inscription : 12 déc. 2020, 15:43
A remercié : 6 fois
A été remercié : 4 fois

Re: [Vds] Sega Naomi2 + netdimm + I/O board JVS Type 3, Fast I/O Taito K91X1243A

#18 Message par kysermens »

Salut, je te mp pour la naomi

Seb82
stick de zinc
Messages : 331
Inscription : 06 nov. 2017, 08:50
A remercié : 0
A été remercié : 2 fois

Re: [Vds] Sega Naomi2 + netdimm + I/O board JVS Type 3, Fast I/O Taito K91X1243A

#19 Message par Seb82 »

Salut
Intéressé par le lot Naomi 2 / netdim ... a la suite
Mp 👍

Avatar de l’utilisateur
xela974
stick de bronze
Messages : 186
Inscription : 24 janv. 2018, 23:42
Localisation : Chatou
A remercié : 23 fois
A été remercié : 7 fois

Re: [Vds] Sega Naomi2 + netdimm + I/O board JVS Type 3, Fast I/O Taito K91X1243A

#20 Message par xela974 »

Up et maj du prix Netboot !

Avatar de l’utilisateur
dokko59
stick de zinc
Messages : 369
Inscription : 12 déc. 2005, 19:18
Localisation : Cambrai/Nord
A remercié : 0
A été remercié : 0

Re: [Vds] Sega Naomi2 + netdimm + I/O board JVS Type 3, Fast I/O Taito K91X1243A

#21 Message par dokko59 »

Sega I/O board JVS Type 3 bien reçu, emballage parfait et livraison rapide :p:
Merci

Avatar de l’utilisateur
kungfoune
stick de rhodium
Messages : 4082
Inscription : 26 nov. 2011, 12:35
Localisation : Dans le 77
A remercié : 0
A été remercié : 0

Re: [Vds] Sega Naomi2 + netdimm + I/O board JVS Type 3, Fast I/O Taito K91X1243A

#22 Message par kungfoune »

hello, je savais pas qu'il y avait une autre possibilité pour la Naomi. Pidiboot? ça fonctionne de la même manière? tu peux chopper ça ou?
Image

Avatar de l’utilisateur
xela974
stick de bronze
Messages : 186
Inscription : 24 janv. 2018, 23:42
Localisation : Chatou
A remercié : 23 fois
A été remercié : 7 fois

Re: [Vds] Sega Naomi2 + netdimm + I/O board JVS Type 3, Fast I/O Taito K91X1243A

#23 Message par xela974 »

up!

Avatar de l’utilisateur
xela974
stick de bronze
Messages : 186
Inscription : 24 janv. 2018, 23:42
Localisation : Chatou
A remercié : 23 fois
A été remercié : 7 fois

Re: [Vds] Sega Lindbergh Control Panel 1L7B + I/O board JVS Type 3, Fast I/O Taito K91X1243A

#24 Message par xela974 »

up !
Netboot vendu
Ajout d'un panel 1P Sega Lindbergh d'origine.

Avatar de l’utilisateur
xela974
stick de bronze
Messages : 186
Inscription : 24 janv. 2018, 23:42
Localisation : Chatou
A remercié : 23 fois
A été remercié : 7 fois

Re: [Vds] Sega Lindbergh Control Panel 1L7B + I/O board JVS Type 3, Fast I/O Taito, Jamma2JVS River Service

#25 Message par xela974 »

up !
Ajout d'un Jamma2JVS River Service, 80€ fdp in

Répondre