Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
- Bill Baroud
- stick d'or
- Messages : 1329
- Inscription : 07 mars 2019, 00:11
- Localisation : entre Bamako et Helsinki
- A remercié : 101 fois
- A été remercié : 37 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
Après moultes relances, j'ose même plus poser la question pour les CPS3 qui devaient arriver incessamment sous peu .... depuis fin 2020
On va finir par croire que Seb a un truc personnel contre les CPS3
C'est bien dommage car il me semblait pas être le seul à en avoir demandé, le portefeuille prêt à dégainer.
On va finir par croire que Seb a un truc personnel contre les CPS3
C'est bien dommage car il me semblait pas être le seul à en avoir demandé, le portefeuille prêt à dégainer.
- Rom1
- stick d'or
- Contact :
- Messages : 1245
- Inscription : 26 avr. 2016, 00:07
- Localisation : Aperture Science Enrichment Center
- A remercié : 144 fois
- A été remercié : 268 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
Non, désolé.
Ventes SEGA Ringedge, Slots/jeux/converts MVS, Adaptateurs MVS/JAMMA/Jeutel/System16, Capkit MTC9000, Bios Naomi, etc.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
-
- stick d'or
- Messages : 1038
- Inscription : 22 déc. 2016, 16:10
- A remercié : 16 fois
- A été remercié : 8 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
Salut
Intéressé par un kit multi cps1 Aje
Dispo ?
J’ai un multi system 16 aussi mais je ne sais pas quel modèle . Ça m’intéresse de le protéger aussi.
Intéressé par un kit multi cps1 Aje
Dispo ?
J’ai un multi system 16 aussi mais je ne sais pas quel modèle . Ça m’intéresse de le protéger aussi.
- Rom1
- stick d'or
- Contact :
- Messages : 1245
- Inscription : 26 avr. 2016, 00:07
- Localisation : Aperture Science Enrichment Center
- A remercié : 144 fois
- A été remercié : 268 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
Comme indiqué dans le premier message:
@s_ghislain si ton CPS1 est un modèle là alors ça doit le faire. Sinon il faudra attendre.
Actuellement les kits disponiblesNote: je ne prend pas de commandes car je ne m'occupe pas de la fabrication (juste l'envoi). J'indique la liste de ce qui est dispo immédiatement, comme ça pas d'attente, pas de galère, plus simple, tout le monde est content
Code : Tout sélectionner
STV (45€)
0 dispo
Capcom CPS1 court (45€)
transparent: 1 dispo
noir: 1 dispo
jaune fluo: 1 dispo
long multi AJEtransparent avec logo CAPCOM: 1 dispo
Cave SH3 (40€)
transparent: 1 dispo
jaune fluo: 2 dispo
transparent avec logo CAVE: 3 dispo
Sega System 16 (45€)
transparent: 1 dispo
Ventes SEGA Ringedge, Slots/jeux/converts MVS, Adaptateurs MVS/JAMMA/Jeutel/System16, Capkit MTC9000, Bios Naomi, etc.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
-
- stick d'or
- Messages : 1038
- Inscription : 22 déc. 2016, 16:10
- A remercié : 16 fois
- A été remercié : 8 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
Quel modèle exactement ? Désolé mais je veux être certain.
Il y a les petits boutons et tout ?
Il y a les petits boutons et tout ?
- Rom1
- stick d'or
- Contact :
- Messages : 1245
- Inscription : 26 avr. 2016, 00:07
- Localisation : Aperture Science Enrichment Center
- A remercié : 144 fois
- A été remercié : 268 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
C'est un problème de longueur
Plutot 30cm ou 35cm ?
Plutot 30cm ou 35cm ?
Ventes SEGA Ringedge, Slots/jeux/converts MVS, Adaptateurs MVS/JAMMA/Jeutel/System16, Capkit MTC9000, Bios Naomi, etc.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
-
- stick d'or
- Messages : 1038
- Inscription : 22 déc. 2016, 16:10
- A remercié : 16 fois
- A été remercié : 8 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
Voilà j’ai mesuré
31 cm de long pin jamma incluse
24 de largeur
C’est bon ?
31 cm de long pin jamma incluse
24 de largeur
C’est bon ?
- lerebours
- stick de zinc
- Messages : 257
- Inscription : 08 août 2006, 18:55
- Localisation : La gouttière
- A remercié : 1 fois
- A été remercié : 16 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
Finalement ça se passera sur place, ça me donnera l'occasion (avec quelques connaissances) de faire aussi un tour de sa salle le temps d'un aprèm'Rom1 a écrit : ↑22 déc. 2022, 23:18 Comme dis dans la vidéo, vous voyez avec Seb directement: https://www.geek-room.com/#venir
Dans l'oeil du Canon
- Rom1
- stick d'or
- Contact :
- Messages : 1245
- Inscription : 26 avr. 2016, 00:07
- Localisation : Aperture Science Enrichment Center
- A remercié : 144 fois
- A été remercié : 268 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
Merci pour le partage
Ventes SEGA Ringedge, Slots/jeux/converts MVS, Adaptateurs MVS/JAMMA/Jeutel/System16, Capkit MTC9000, Bios Naomi, etc.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
-
- stick d'or
- Messages : 1038
- Inscription : 22 déc. 2016, 16:10
- A remercié : 16 fois
- A été remercié : 8 fois
- Rom1
- stick d'or
- Contact :
- Messages : 1245
- Inscription : 26 avr. 2016, 00:07
- Localisation : Aperture Science Enrichment Center
- A remercié : 144 fois
- A été remercié : 268 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
Hello, quelques Sega ST-V de dispo: 2 noirs, 2 transparentes, 1 fluorescente.
Les CPS3 devraient avancer bientôt, je vous tiendrai au courant.
Les CPS3 devraient avancer bientôt, je vous tiendrai au courant.
Ventes SEGA Ringedge, Slots/jeux/converts MVS, Adaptateurs MVS/JAMMA/Jeutel/System16, Capkit MTC9000, Bios Naomi, etc.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
-
- stick de zinc
- Messages : 439
- Inscription : 27 janv. 2021, 14:38
- A remercié : 22 fois
- A été remercié : 12 fois
- santashiva
- stick d'argent
- Messages : 574
- Inscription : 16 juil. 2010, 23:00
- A remercié : 16 fois
- A été remercié : 10 fois
- lerebours
- stick de zinc
- Messages : 257
- Inscription : 08 août 2006, 18:55
- Localisation : La gouttière
- A remercié : 1 fois
- A été remercié : 16 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
Poster récupéré direct à la Geek Room ce WE, ce qui m'aura donnée l'occasion de découvrir ce très joli endroit, blindé de bornes dédiées à tire larigot (I'll be back).
Sinon, c'est de qualité et très plaisant à l'œil, vivement que j'l'encadre
Sinon, c'est de qualité et très plaisant à l'œil, vivement que j'l'encadre
Dans l'oeil du Canon
-
- stick de plomb
- Messages : 99
- Inscription : 02 juil. 2021, 11:31
- A remercié : 12 fois
- A été remercié : 11 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
Bonjour.
Il y a t’il possibilité de faire des plexi sur mesure. J’aimerai y mettre un Ultimate mortal kombat 3 (Wolf unit) dedans pour qu’il puisse résister au temps !!
Merci.
Il y a t’il possibilité de faire des plexi sur mesure. J’aimerai y mettre un Ultimate mortal kombat 3 (Wolf unit) dedans pour qu’il puisse résister au temps !!
Merci.
- Rom1
- stick d'or
- Contact :
- Messages : 1245
- Inscription : 26 avr. 2016, 00:07
- Localisation : Aperture Science Enrichment Center
- A remercié : 144 fois
- A été remercié : 268 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
Salut,
Non désolé pas de custom; on va déjà attendre les CPS3...
Non désolé pas de custom; on va déjà attendre les CPS3...
Ventes SEGA Ringedge, Slots/jeux/converts MVS, Adaptateurs MVS/JAMMA/Jeutel/System16, Capkit MTC9000, Bios Naomi, etc.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
- Arcade newbie
- 100 patates!!
- Messages : 651
- Inscription : 09 sept. 2020, 17:11
- Localisation : 77
- A remercié : 30 fois
- A été remercié : 40 fois
- John46
- stick dans le cul
- Messages : 15841
- Inscription : 24 avr. 2010, 20:45
- Localisation : DTC
- A remercié : 0
- A été remercié : 84 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
J'ai lu "calendrier sous-marin" l'habitude de la section vente ..
- Rom1
- stick d'or
- Contact :
- Messages : 1245
- Inscription : 26 avr. 2016, 00:07
- Localisation : Aperture Science Enrichment Center
- A remercié : 144 fois
- A été remercié : 268 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
J'avais lu la même chose quand il m'en a parlé la première fois
Avoue que ça aurait été beaucoup plus drôle des sous marin !
Ventes SEGA Ringedge, Slots/jeux/converts MVS, Adaptateurs MVS/JAMMA/Jeutel/System16, Capkit MTC9000, Bios Naomi, etc.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
-
- stick d'or
- Messages : 1038
- Inscription : 22 déc. 2016, 16:10
- A remercié : 16 fois
- A été remercié : 8 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
Hello
Y a un pour multi cps1 aje dispo ?
Si oui je prends
Y a un pour multi cps1 aje dispo ?
Si oui je prends
- Rom1
- stick d'or
- Contact :
- Messages : 1245
- Inscription : 26 avr. 2016, 00:07
- Localisation : Aperture Science Enrichment Center
- A remercié : 144 fois
- A été remercié : 268 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
Je vérifie dimanche. Si jamais j'oublie ping moi.
Ventes SEGA Ringedge, Slots/jeux/converts MVS, Adaptateurs MVS/JAMMA/Jeutel/System16, Capkit MTC9000, Bios Naomi, etc.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
-
- stick d'or
- Messages : 1038
- Inscription : 22 déc. 2016, 16:10
- A remercié : 16 fois
- A été remercié : 8 fois
- Rom1
- stick d'or
- Contact :
- Messages : 1245
- Inscription : 26 avr. 2016, 00:07
- Localisation : Aperture Science Enrichment Center
- A remercié : 144 fois
- A été remercié : 268 fois
Re: Made in Seb': Plexi pour PCB, Posters, Calendrier sous-main
J'ai un CPS1 multi long avec logo.
Ventes SEGA Ringedge, Slots/jeux/converts MVS, Adaptateurs MVS/JAMMA/Jeutel/System16, Capkit MTC9000, Bios Naomi, etc.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.