
Une petite vue d'ensemble bien sympa, toutes les bornes blanche au milieu c'est du tekken!

Voilà une bonne moitié de la salle. Elle est pas énorme mais bien fourni pour les fans comme moi de tekken! J'ajoute qu'il y a les meilleurs joueurs mondiaux de T5 qui la fréquente, sauf si on pense que les japs sont les meilleurs...
Je vais maintenant attirer l'attention sur le fait qu'ils jouent à tout leurs jeux avec des sticks que j'arrivent pas à voir c'est quoi les marques, mais équipé de cônes, c'est rarement le cas en France, moi je trouve ça bien plus confortable! Il faut des ptites mains de japonnais pour jouer avec la boule, les porcs bien gras préfèrent les cône!

Seulement 4 bornes de ce jeu 2D... Pas trop à la mode apparemment, ils sont surtout plus axés sur les tekken quoi... J'insiste aussi sur le fait qu'ils jouent aux cônes la dessus aussi.

Cône sur T4...

Encore un stick à cônes dont je n'arrive pas à determiner la marque!

Tekken Tag Tournament au cône comme d'hab, les 3/4 des bornes de la salle sont consacrés à tekken!
Le matos: Hormis leur canapé ultra confortable pour jouer à WE, ils disposent de bornes en bon état, inconnu mais bien entretenu, et des tabouret, moins classieux que ceux sega mais au moins ils sont à la bonne hauteur pour jouer c'est le principal!

Vlà ine installation pour WE avec un ptit canapé bien sympa à 50cm de l'écran!

Naniiii? (Dédicase à un pote) Je ne connaissais pas ce syteme, et le cameraman non plus d'ailleurs!

La Ps2 dans sa prsion de plastiques mais d'un peu plus près.

Marrant le fait que la machine mette le nombre de joueurs.

La machine est bien pensée, elle indique clairement le temps que vous aller jouer, j'espère qu'ils ont pas payé cher! C'est parti pour 5:30 de WE en folie!

Bon plan sur leur canapé devant WE? C'est abusé ils ont des canapés!

Voilà une borne coréenne qui ne fait tourner que T5 dans cette salle, inconnu au bataillon, la marque c'est "Crown"

D'autre bornes, sans doute moins évolué que celle T5, ici on y fait tourner TTT, un jeux 2D que vous pourrez peut etre identifier, moi je connais pas assez pour m'y risquer, T4 aussi...

C'est tout ce que je peux faire pour les tabourets sur lesquelles ils jouent à T5, note: Les coussinets sur lesquels ils placent leurs fesses de coréens est rouge!
Les quelques coréens: Ben voilà, je me suis permis d'analyser 2 ou 3 faits et gestes des gamers de cette salle, rien de bien méchant ni fouillé, mais marrant!

Il a paumé son match et ses sous et il repart avec le sourire! Si seulement on avait ça partout en France! Note: Le gars derrière est bien chaud, il veut se le faire le Leedy, mais il va se faire défonceeeeer!

Sale gosse! Non seulement il doit jouer comme un ouf à T4, mais en plus il prend Jin le saligaud! Raaah les jeunes sont biens les mêmes partout!

Leedy en pleine action! Un peu hors sujet, mais ce mec ne doit pas beaucoup payer les parties! Il est déjà à 10 wins d'affilé!

Marrant! A chaque qu'il s'est rendu compte qu'il était filmé, il s'interressait aux ventilo ou aux sols de la salle! Il est timide dans la vie Leedy, mais à tekken faut pas le chercher!
Voilà, j'espère que ça en a intérréssé quelque uns, en tout cas j'ai pris 2 heures pour le faire, donc si ça ne vous plaît pas, que c'est moche et que vous ch*ez sur les coréens: ne postez pas!
Par contre si vous avez des conseils sur la mise en page, ou des compliments, ou des questions: n'hesitez pas!
Le Matos coréen en général:
Voilà plein d'infos sur les sticks coréens, communiqué par un coréen lui même qui bosse surement dans ce domaine! (attention anglais!)
Y'a ptet des liens morts j'ai pas vérifié...
\\\\\\\\\STICKS \\\\\\\\\\\
1.Fanta Stick (MyungShin)
These make up for probably 90% of sticks used in korean arcades. These are good sticks, and since it's completely round and has no corners on rotation, it shouldn't be hard to adapt to. The recent batches of Fantas have been coming out with light blue microswitches (by Deco), instead of the usual brown/black (brown and black are exactly the same, made by LG/=Gersung). After some on spot testing, I found these Deco switches to be a horrible match for Fanta sticks, since hitting corners right was so much harder than the brown switches. I'll just grab the ones with LG microswitches.
pics (took with a used one I had laying around)
Fanta profile (http://laugh25.com.ne.kr/stick_fanta_profile.JPG)
Fanta bottom (http://laugh25.com.ne.kr/stick_fanta_bottom.JPG)
Fanta bottom close-up (http://laugh25.com.ne.kr/fanta_microswitch.JPG)
Fanta knob (http://laugh25.com.ne.kr/stick_fanta_knob.JPG)
Fanta avalable colors (red and green) (http://laugh25.com.ne.kr/stick_fanta_colors.JPG)
LG microswitch side 1 (http://laugh25.com.ne.kr/microswitch_LG1.JPG)
LG microswitch side 2 (http://laugh25.com.ne.kr/microswitch_LG2.JPG)
2.Crown square actuator
This stick was new to me, but from on-site testing, this one had light resistence and it found corners very good. I haven't played on it yet. I gotta play on it tomorrow then. I'm putting so much time into this thing...
pics
Crown square profile (http://laugh25.com.ne.kr/stick_crown_square_profile.JPG)
Crown square bottom (http://laugh25.com.ne.kr/stick_crown_square_bottom.JPG)
Crown square knob (http://laugh25.com.ne.kr/stick_crown_square_knob.JPG)
Deco microswitch (http://laugh25.com.ne.kr/microswitch_Deco.JPG)
3.Crown round actuator
This one used to be pretty stiff with WONWOO microswitches in the past, but ever since they changed to Deco microswitches, they seem to be light enough. Seems to get corner inputs alright. This stick is NOT popular in the arcades though. I still got a sample for ya'll.
pics
Crown round profile (http://laugh25.com.ne.kr/stick_crown_round_profile.JPG)
Crown round bottom (http://laugh25.com.ne.kr/stick_crown_round_bottom2.JPG)
Crown round knob (http://laugh25.com.ne.kr/stick_crown_round_knob.JPG)
Crown round microswitch (prolly no longer in production with this microswitch) (http://laugh25.com.ne.kr/stick_crown_round_switch2.JPG)
Here's a size comparison of different sticks
click (http://laugh25.com.ne.kr/sticks_size_comp.JPG)
If you want a shaft with a color other than red or green, it probably won't happen. Although I could try to find some real old cabinet with sticks that have orange/black shaft in them and try to swap the shaft with the new one IF they match, you'll have to convince me pretty good to go into that trouble.

pics of some old ass cabs
Cab1 - orange (http://laugh25.com.ne.kr/orange.JPG)
Cab2 - black (http://laugh25.com.ne.kr/black.JPG)
\\\\\\\\\\\\\BUTTONS\\\\\\\\\\\\\\\
1.Crown Snap-on
I like these buttons a lot. These snap onto the Crown cabinets, and the the panel it mounts to has to be 11mm, and the hole is 28mm in diameter. Flat top. The pictures explain it all.
pics
Crown snap-on buttons (http://laugh25.com.ne.kr/button_crown_snap.JPG)
Crown snap-on bottom (http://laugh25.com.ne.kr/button_crown_snap_bottom.JPG)
Crown snap-on profile (http://laugh25.com.ne.kr/button_crown_snap_profile.JPG)
Crown snap-on switch (http://laugh25.com.ne.kr/button_crown_snap_switch.JPG)
Crown snap-on colors (RED/BLUE/YELLOW) I've seen 1 black one my whole life (http://laugh25.com.ne.kr/button_crown_snap_colors.JPG)
2.Crown Snap-on/Screw-on
These can be snap-ons as well as screw-ons. The button quality is just as good as the snap on. I think it snaps to 2 different thicknesses, if you look closely at the profile view. This would work for mounting directly on the plexi as well as any wood. Flat top.
pics
Crown screw-/snap profile (http://laugh25.com.ne.kr/button_crown_screw_profile.JPG)
Crown screw/snap colors (RED/YELLOW/GREEN) (http://laugh25.com.ne.kr/button_crown_screw_colors.JPG)
Crown screw/snap bottom (http://laugh25.com.ne.kr/button_crown_screw_bottom.JPG)
3.Crown Illuminating Buttons
These buttons are just for kicks. It uses a Deco microswitch for the input and 12v for the bulb. Flat top. These light up when you press them. Look
pics
Crown illumin button bottom (hollow) (http://laugh25.com.ne.kr/button_lumin_bottom.JPG)
Crown illumin bulb+switch (http://laugh25.com.ne.kr/button_lumin_bulbswitch.JPG)
Crown illumin assembled (http://laugh25.com.ne.kr/button_lumin_assemb.JPG)
Crown illumin assembled /w nut (http://laugh25.com.ne.kr/button_lumin_assemb1.JPG)
avaliable colors (http://laugh25.com.ne.kr/button_lumin_colors.JPG)
3.Small Screw-On Buttons
These are tipical start-button-size buttons using switches. 24mm for the hole, I think. Convex top
pics
Small button colors (YELLOW/BLUE/ nasty green) (http://laugh25.com.ne.kr/small_buttons.JPG)
Small button bottom (http://laugh25.com.ne.kr/small_button_bottom.JPG)
\\\\\\\\\\\\\OTHER INFO\\\\\\\\\\\\\\\
Here are some extra pics for miscelaneous info.
Crown 203 Cabinet panel top (this is my latest stick project) (http://laugh25.com.ne.kr/customstick_top.JPG)
Crown 203 custom stick bottom (http://laugh25.com.ne.kr/customstick_bottom.JPG)
You need a black panel like this to make it (http://laugh25.com.ne.kr/panel_plastic.JPG)
It's got a comfortable angle (http://laugh25.com.ne.kr/panel_plastic_angle.JPG)
This is where those Crown-specific snap-ons go (bottom view) (http://laugh25.com.ne.kr/panel_plastic_buttonhole.JPG)
The cradle for the stick (http://laugh25.com.ne.kr/panel_plastic_stickhole.JPG)
Put a sticker, like this one, on top (I wish they had the Tekken5 sticker, that'd be dope as hell) (http://laugh25.com.ne.kr/panel_sticker.JPG)
The sticker has all the holes pre-cut (http://laugh25.com.ne.kr/panel_sticker_precut.JPG)
bonus pics
MVS Catridges (http://laugh25.com.ne.kr/bonus1.JPG)
PCBs (http://laugh25.com.ne.kr/bonus2.JPG)
For those confused about the Korean stick feeling, heres a compilation of posts of mine from TZ & SRK:
(note: TZ est le forum mondial de tekken, donc une référence, où aussi bien les japonnais que les coréens y post, autant que des Américains, ou des Européens. SRK pour Shoryuken, un forum assez connu je pense)
The best buttons to use are the ones made by Crown specifically for use on their cabs. They cost about 50 cents each, all have black rims, and the colors that I always see are red, blue, and yellow. These are snap-ons that mounts onto 11mm thick panels, the button hole is 28mm in diameter, and the buttons have flat top with rounded edges. The best korean buttons around for sure. There's a screw-on (nuts and bolts) type that's not as good as the Crown snap-ons performance wise, just acceptable quality.
In terms of stick construction, there are some Crown sticks that press the microswitches directly with a square plastic at the end of the metal shaft, like competition. I just need a camera with me tomorrow to just show all these.
The hole for the stick is either 36mm or 37mm in diameter, and the panel for the stick could be up to 15mm thick. The metal plate on which the stick gets screwed, is 81.5mm x 65.5mm
Tout ça trouvé sur http://www.shoryuken.com/forums/archive ... 89845.html! Dans les archive du forum, faut le vouloir!
Excusez-moi, c'est surement un peu lourd, si vous voulez je l'enleverrai et le mettrai sur un autre post en page 2...